| |
Polyurea Materials and Product Lines
| VersaFlex VF 380 |
|
VersaFlex VF 380 is a 100% solids elastomeric polyurea developed for applications such as geotextile lining membranes. VF 380 may also be applied to concrete and steel substrates. VF 380 is a volatile free, odorless system applied with 1:1 mix ratio with plural component spray equipment.
|
|
|
|
|
| VersaFlex VT-40 Finish Coat |
|
| VersaFlex VT-40 Finish Coat is a combination of Viton and PTFE, offering
outstanding chemical, temperature and permeation resistance. VT-40 Finish Coat is designed to be used in combination with LC-25 Lock Coat and VersaFlex Fast Set Spray materials. VersaFlex VT-40 is a heavy solids protective top coating suitable for most service environments. VT-40 may be applied directly to metal. VersaFlex recommends minimum 20 dry mils thickness for containment of harsh chemicals. |
|
|
|
|
|
|
| VersaFlex VF 340 |
|
| VersaFlex VF 340 is a 100% solids elastomeric polyurea membrane developed for applications requiring a fire rated coating. VF 340 is a volatile free, odorless system, applied at a 1:1 mix ratio with plural component spray equipment. VF 340 gels in 10-15 seconds, forming a monolithic membrane suitable for concrete and metal applications. As a result, downtime is minimized, allowing rapid return to service. It can be applied at a thickness of 10 to 200 mils in a single application. |
|
|
|
|
| VersaFlex VF 20 |
|
| VersaFlex VF 20 is a two-component isocyanate and resin blend primer for use on all substrates. VF 20 may be diluted to reduce viscosity. VF 20 has a working time of 45 minutes. Ponding on the surface is to be avoided. |
|
|
|
|
| VersaFlex AquaVers 405 |
|
| VersaFlex AquaVers 405 is a fast set, rapid curing, 100% solids, flexible, two-component pure polyurea elastomer spray coating material. AquaVers 405 is potable water approved in accordance with ANSI/NSF 61.5 barrier material. Its extremely fast gel time makes it suitable for applications down to -20o F without special conditioning of the component resins and isocyanates. AquaVers 405 produces an extremely tough film at all thicknesses. AquaVers 405 is relatively moisture and temperature insensitive, allowing application in the most problematic ambient conditions. |
|
|
|
|
| VersaFlex FSS 45DC-F |
|
| VersaFlex FSS 45DC-F is a fast set, rapid curing, 100% solids, flexible, two- component polyurea elastomer spray coating material. VersaFlex FSS 45DC-F is used by itself or in combination with other materials to produce coatings, liners, wearing courses, and resilient surfaces on metal and other substrates. Its extremely fast gel time makes it suitable for applications down to -200F, without special conditioning of the component resins and isocyanates. VersaFlex FSS 45DC-F produces an extremely tough film at all thicknesses. Single or multiple pass applications produce films from 10 mils to 1,000 mils without appreciable sag or runs. VersaFlex FSS 45DC-F may be applied in all positions and to any properly prepared substrate. VersaFlex FSS 45DC-F is inert, it will not hydrolyze, leach, or contaminate other materials, and is bondable and paintable. VersaFlex FSS 45DC-F is relatively moisture and temperature insensitive, allowing application in the most problematic ambient conditions. |
|
|
|
|
|
|
|
back to top
|
|
| |
More Information About Polyurea Lining Systems:
|
| |
|
